Research Work Presented at International Conferences - 205 * So Far



 Research Work Presented at International Conferences  - 205 * So Far 

1.   Animesh Bain, G.Keerthi Reddy, Dr.J.Saranya, A.Anitha Lakshmi, Dr.N.Sateesh, Dr.S.K.Singh, Dr.Ram Subbiah (2021), Wear And Microstructure Analysis On AISI 420 Stainless Steel By Annealing & Tempering Process Under Dry Sliding Conditions, International Conference on Materials Processing and Characterization, ICMPC – 2021 at National Institute of Technical Teachers Training & Research – NITTTR, Chandigarh from 6th-9th October,2021(Paper Accepted).

2.   Venkatesan.S, Giridharan P.K, Sivakumar N S, Dr.Ram Subbiah, Sharavanan.S, Senthamilselvi.A (2021), Tribological Behavior of AA7168 Hybrid Composite Sheets for Aerospace Structures Fabricated through COMPO Casting, International Conference on Materials Processing and Characterization, ICMPC – 2021 at National Institute of Technical Teachers Training & Research – NITTTR, Chandigarh from 6th-9th October,2021(Paper Accepted).

3.   A.Anitha Lakshmi, Dr.Ch.Srinivasa Rao, Dr.N.Sateesh, Dr.Ram Subbiah (2021), Implementation of Taguchi Approach on Investigation of Formability for Al 8011 Sheets at Elevated Temperatures, International Conference on Materials Processing and Characterization, ICMPC – 2021 at National Institute of Technical Teachers Training & Research – NITTTR, Chandigarh from 6th-9th October,2021(Paper Accepted).

4.   Dr.Sateesh. N, Dr.Ram Subbiah, B.Ch Nookaraju, A. Anitha lakshmi (2021), Analysis on Effect of Nanofluid on Process Parameters In Machining of EN19 Steel,  International Conference on Materials Processing and Characterization, ICMPC – 2021 at National Institute of Technical Teachers Training & Research – NITTTR, Chandigarh from 6th-9th October,2021(Paper Accepted).

5.   S.Vasanthaseelan, P.Manoj Kumar, R.Anandkumar, K.Hari Ram, Dr.Ram Subbiah, V.Suresh, A.S.Abishek, R.Anitha, P.Aravinth, S.V.Balaji (2021), Investigation on Solar Water Heater with Different Types of Turbulators, International Conference on  Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT - 2021) at Federal Institute of Science and Technology, Kerala on 22rd- 23rd April 2021.

6.   N.Vigneshkumar, M.Venkatasudhahar, P.Manoj Kumar, A.Ramesh, Dr.Ram Subbiah, P.Michael Joseph Staline, V.Suresh, M.Naresh Kumar, S.Monith, R.Manoj kumar, M.Kriuthikeswaran (2021), Investigation on Indirect Solar Dryer for Drying Sliced Potatoes using Phase Change Materials (PCM), International Conference on  Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT - 2021) at Federal Institute of Science and Technology, Kerala on 22rd- 23rd April 2021.

7.   A.Felix Sahayaraj, N.Senthil Kannan, Girisha L, S.Kannan, D.Rahul, Dr.Ram Subbiah (2021), Performance analysis of Peel Test on Fused Filament Fabricated Polypropylene-Aluminium, International Conference on  Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT - 2021) at Federal Institute of Science and Technology, Kerala on 22rd- 23rd April 2021.

8.   M.Balaji, S.N.Dinesh, S.Vikram Vetrivel, P.Manoj Kumar, Dr.Ram Subbiah (2021), Augmenting Agility in Production Flow through ANP, International Conference on  Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT - 2021) at Federal Institute of Science and Technology, Kerala on 22rd- 23rd April 2021.

 

9.   M.Rajkumar, N.Senthil Kannan, M.Bruhathi, D.Malteshkumar, Girisha L, A.Felix Sahayaraj, Dr.Ram Subbiah (2021), Taguchi Optimization of Cryogenic Treatment of Haynes Alloy, International Conference on  Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT - 2021) at Federal Institute of Science and Technology, Kerala on 22rd- 23rd April 2021.

 

10.  S.N.Dinesh, S.Ravi, P.Manoj Kumar, Dr.Ram Subbiah, Alagar Karthick, P.T.Saravanakumar, R.Aravinth Pranav (2021), Study on an ETC Solar Water Heater using flat and Wavy Diffuse Reflectors, International Conference on  Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT - 2021) at Federal Institute of Science and Technology, Kerala on 22rd- 23rd April 2021.

 

11.  M.Rajkumar, N.Senthil Kannan, M.Bruhathi, D.Malteshkumar, L.Girisha, A.Felix Sahayaraj, Dr.Ram Subbiah (2021), Cryogenic Treatment and Taguchi Optimization of Haynes Alloy, International Conference on Computations in Materials and Applied Engineering (CMAE – 2021) at Inderprastha Engineering College, Ghaziabad, Uttar Pradesh from June 26th – 27th,2021 (Paper Accepted).

 

12.  D.Raguraman, K.Vetri Velmurugan, G.Bharath Reddy, V.Paramasivam, P.Akshay Nandan, D.Rahul, Dr.Ram Subbiah (2021), Wear Behavior Analysis of Vitallium Metal Matrix Composite, International Conference on Computations in Materials and Applied Engineering (CMAE – 2021) at Inderprastha Engineering College, Ghaziabad, Uttar Pradesh from June 26th – 27th,2021 (Paper Accepted).

 

13.  P.Manikandan, Vuda Rahul, M.Thirunavukkarasu, N.Senthil Kannan, Mubeen sheikh, K.Sai Subramaniam, Vinay Kumar. V, Dr.Ram Subbiah (2021), Influence of Mixed Dielectric Fluids on Material Removal Performance during Electric Discharge Machining Process, International Conference on Computations in Materials and Applied Engineering (CMAE – 2021) at Inderprastha Engineering College, Ghaziabad, Uttar Pradesh from June 26th – 27th,2021 (Paper Accepted).

 

14.  R.Raghu Chand, R.Balaji, R.Karthikeyan, M.Balasubramanian, SNS Santhosh Kumar, Dr.Ram Subbiah (2021), Electron Beam Machining and Process Optimization of Chromium Composite, International Conference on Emerging trends in Material Science, Technology and Engineering at Syed Ammal Engineering College, Ramanathapuram, Tamilnadu on 4th - 6th March, 2021.

 

15.  R.Raghu Chand, R.Balaji, R.Karthikeyan, M.Balasubramanian, SNS Santhosh Kumar, Dr.Ram Subbiah (2021), Optimization and Machinability Analysis of Chromium Composite, International Conference on Emerging trends in Material Science, Technology and Engineering at Syed Ammal Engineering College, Ramanathapuram, Tamilnadu on 4th - 6th March, 2021.

 

16.  S.Nirmal Moses, N.Keerthi Kumar, M.Balasubramanian, A.Daniel Das, Mubeen Shaikh, Dr.Ram Subbiah (2021), Parametric Optimization of Hot Chamber Pressure Die Casting Process, International Conference on Emerging trends in Material Science, Technology and Engineering at Syed Ammal Engineering College, Ramanathapuram, Tamilnadu on 4th - 6th March, 2021.

 

17.  Godala Shaikshavali, M.Murali Mohan, G.Praveen Kumar Yadav, S.Krishnaraj, Girisha L, Dr.Ram Subbiah (2021), Analysis of Parametric Effect on Domex Steel using Plasma Arc Machining Process, International Conference on Emerging trends in Material Science, Technology and Engineering at Syed Ammal Engineering College, Ramanathapuram, Tamilnadu on 4th - 6th March, 2021.

 

18.  R.Prem Kumar, M.Robert Paul, J.Manikandan, G.Balamuruga Mohan Raj, S.Ganapathy, Dr.Ram Subbiah (2021), Evaluation of Welding Strength and Optimization on Seam Welding of Domex Steel, International Conference on Emerging trends in Material Science, Technology and Engineering at Syed Ammal Engineering College, Ramanathapuram, Tamilnadu on 4th - 6th March, 2021.

 

19.  A.Felix Sahayaraj, J.Venkatesh, R.Raghu, R.Senthil Kumar, E.Manikandan, Dr.Ram Subbiah (2021), Analysis of Formability and Optimization on Nickel Coated Stainless Steel Sheet, International Conference on Emerging trends in Material Science, Technology and Engineering at Syed Ammal Engineering College, Ramanathapuram, Tamilnadu on 4th - 6th March, 2021.

 

20.  V Gitanjali, P Nithya, P.Pandiarajan, N Dhruthi, T Vineeth Raja, Dr.Ram Subbiah (2021), Performance Machinability through Electrochemical Grinding of Strenx Steel, International Conference on Emerging trends in Material Science, Technology and Engineering at Syed Ammal Engineering College, Ramanathapuram, Tamilnadu on 4th - 6th March, 2021.

 

21.  Mahesh Mallampati, K. Somasundaram, J.Saranya, C.Harsha vardhan, V.Rakesh Kumar, Dr.Ram Subbiah (2021), Analysis of Responses on Zirconium Carbide based Titanium using Laser Beam Machining Process, International Conference on Emerging trends in Material Science, Technology and Engineering at Syed Ammal Engineering College, Ramanathapuram, Tamilnadu on 4th - 6th March, 2021.

 

22.  N.Ravikumar , P.Sharmila, S.P.Premnath, Rajakumar S Rai, J.Mohammed Feros Khan, Dr.Ram Subbiah (2021), Performance and Optimization of Parameters on Rubber Punching Process, International Conference on Emerging trends in Material Science, Technology and Engineering at Syed Ammal Engineering College, Ramanathapuram, Tamilnadu on 4th - 6th March, 2021.

 

23.  R.Prem Kumar, Girisha L, T.Pravinprabu, A.Felix Sahayaraj, SNS Santhosh Kumar, Dr.Ram Subbiah (2021), Analysis of Abrasive Wear Resistance on Scandium Composite, International Conference on Emerging trends in Material Science, Technology and Engineering at Syed Ammal Engineering College, Ramanathapuram, Tamilnadu on 4th - 6th March, 2021.

 

24.  G.Phanindra Raja Varma, M.Sai Krishna, M.Ramanathan, G.Meghana, V.Naveen, Dr.Ram Subbiah (2021), Estimation of welding strength on Cr-Mo using FSW Process, International Conference on Emerging trends in Material Science, Technology and Engineering at Syed Ammal Engineering College, Ramanathapuram, Tamilnadu on 4th - 6th March, 2021.

 

25.  A.Damodar Reddy, P.N.Karthikeyan, S.Krishnaraj, Adarsh Ajayan, K. Sunil Kumar Reddy, Dr.Ram Subbiah (2021), Analysis and Optimization of Hot Extrusion Process on Strenx Steel 900, International Conference on Futuristic Research in Engineering Smart Materials FRESM’21 at CMRIT, Bengaluru on April 23rd – 24th,2021.

 

26.  S.Sathish, Mubeen Shaikh, Girisha L, R.Senthil Kumar, M.Ramesh Kumar, Dr.Ram Subbiah (2021), Evaluation of Hardness and analysis of Parameters on Reinforced Al-MMC, International Conference on Futuristic Research in Engineering Smart Materials FRESM’21 at CMRIT, Bengaluru on April 23rd – 24th,2021.

 

27.  D.Prathusha , J.Venkatesh, K.K Arun, Kulkarni Sanjay Kumar, S.Prabhu, Dr.Ram Subbiah (2021), Machining Behaviors of Nickel Titanium Composite using Non Traditional Machining Processes, International Conference on Futuristic Research in Engineering Smart Materials FRESM’21 at CMRIT, Bengaluru on April 23rd – 24th,2021.

 

28.  S.Sathish, K.Kesavaraj, L Girisha, A.Daniel Das, Pradeep Johnson, Dr.Ram Subbiah (2021), Parametric Optimization of Explosive Welding Process on Nickel Titanium Alloys, International Conference on Futuristic Research in Engineering Smart Materials FRESM’21 at CMRIT, Bengaluru on April 23rd – 24th,2021.

 

29.  Shivani Koppula , Venkata Gautam Jagarlamudi, Reddi Sai Prudhvi, Aakula Rajkumar, S. Prashanth , Dr. J. Saranya, Dr.N.Sateesh, Dr.Ram Subbiah (2020), Investigation of AISI 904L Austenitic Stainless Steel by Carbonitriding Process under Dry Sliding Conditions, International Conference on Materials Processing and Characterization, ICMPC – 2020 at Indian Institute of Technology - IIT, Indore, M.P, from 15th to 17th December 2020.

 

30.  Lakshmi Deepak Tadepalli, Ananda Mithra Gosala, Lokesh Kondamuru , Tappa Vineeth Raj , T. Anirudh , Dr. J Saranya , Dr. V. Vinod Kumar, Dr. Ram Subbiah (2020), Microstructure Analysis and Wear Characterization of AISI 316 Austenitic Stainless Steel by Cyaniding Process, International Conference on Materials Processing and Characterization, ICMPC – 2020 at Indian Institute of Technology - IIT, Indore, M.P, from 15th to 17th December 2020.

 

31.  K.Ramya Sree , G.Keerthi Reddy , G.Lakshmi Prasanna , J. Saranya , A.Anitha Lakshmi , M.Swetha , T.Vineeth Raj, Dr.Ram Subbiah (2020), Dry Sliding Wear Behavior of Treated AISI 304 Stainless Steel by Gas Nitriding Processes, International Conference on Materials Processing and Characterization, ICMPC – 2020 at Indian Institute of Technology - IIT, Indore, M.P, from 15th to 17th December 2020.

 

32.  M. Mamatha Gandhi , Animesh Bain , G.Lakshmi Prasanna , M.Vamshi , J.Saranya , N.Dhruthi , N.Sateesh, Dr. Ram Subbiah (2020), Examination on Dry Sliding Wear Behavior of AISI 304 Stainless Steel Treated with Salt Bath Nitriding Process, International Conference on Materials Processing and Characterization, ICMPC – 2020 at Indian Institute of Technology - IIT, Indore, M.P, from 15th to 17th December 2020.

 

33.     Rohit Sai Krishna A , Prudhvi Sri Kalyan K , Chandu Prasad Yadav M , J.Saranya , B.Ch.Nookaraju, A.Anitha Lakshmi , S.Prashanth, Dr.Ram Subbiah (2020), Assessment of AISI 304 Stainless Steel by Cyaniding process under Dry Sliding Conditions, International Conference on Materials Processing and Characterization, ICMPC – 2020 at Indian Institute of Technology - IIT, Indore, M.P, from 15th to 17th December 2020.

 

34.     Divya Marelli, Dr.N.Sateesh, B.Ch.Nookaraju, A.Anitha Lakshmi, Dr.Ram Subbiah (2020), Multi performance  Optimisation Of  Wire-Cut EDM Process Parameters of Incoloy 800 alloy using Grey relational analysis, International Conference on Materials Processing and Characterization, ICMPC – 2020 at Indian Institute of Technology - IIT, Indore, M.P, from 15th to 17th December 2020.

 

35.     D. Deepika, A. Anitha Lakshmi , Dr. Ch. Srinivasa Rao , Dr. N. Sateesh, B. Ch. Nookaraju , Dr. Ram Subbiah (2020), Formability of Tailor Welded Blanks of Aluminium Alloy and Steel- A Review, International Conference on Manufacturing, Material Science and Engineering, CMR Institute of Technology, Hyderabad from 18th to 19th December 2020.

 

36.     D. Deepika, A. Anitha Lakshmi, Dr. Ch. Srinivasa Rao, Dr. N. Sateesh, B. Ch. Nookaraju, Dr. Ram Subbiah (2020), Evaluation and optimization of Material Properties of Tailor welded Al 6061alloy and ASS 304 sheets Using Taguchi Robust Design, International Conference on Manufacturing, Material Science and Engineering, CMR Institute of Technology, Hyderabad from18th to 19th December 2020.

 

37.     Dr. Ram Subbiah (2020), Experimental and Transient Thermal Analysis of Screen Mesh Wick Heat Pipe,  International Conference on Manufacturing, Material Science and Engineering, CMR Institute of Technology, Hyderabad from18th to 19th December 2020.

 

38.     T.Arunkumar,K.Aditya Sreevatsa, Dinesh R Krishnan, Dr.Ram Subbiah (2020), corrosion behavior of aluminium 6061/ MWCNT Composite prepared by double stir casting method, International conference on advances in materials processing and manufacturing applications, National Institute of Technology, Uttarakhand,  

From 5th – 6th November 2020.

 

39.     Dr.Ram Subbiah (2020), Innovative Content Management System Implemented at GRIET, Hyderabad, International Web Conference on Creation and Well Being in the New Changing World, Dewan Institute of Management Studies, Uttarpradesh from 28th – 29th June,2020.

 

40.     Dr.Ram Subbiah (2020), Modern Tools in Information and Communication Technology for Active Learning, International Web Conference on Creation and Well Being in the New Changing World, Dewan Institute of Management Studies, Uttarpradesh from 28th – 29th June,2020.

 

41.     Dr.Ram Subbiah (2020), Methods to Overcome Plagiarism in a Research Paper, International Conference on Innovative Challenges in Multidisciplinary Research and Practices, Hindusthan College of Arts and Science, Coimbatore from 15th – 19th June, 2020.

 

42.     Dr.Ram Subbiah (2020), Importance of Literature Survey and Interpretation of Results in a Research Paper,  International Conference on Innovative Challenges in Multidisciplinary Research and Practices, Hindusthan College of Arts and Science, Coimbatore from 15th – 19th June, 2020.

 

43.     T.Lakshmi Deepak, Dr.Ram Subbiah (2020), Influence of Dry Sliding Wear Behavior and Assessment of Properties on Treated AISI310 SS Material by Gas Nitriding Process, International Conference on Materials Processing and Characterization, ICMPC – 2020 at GLA University, Mathura, U.P, from 21st to 23rd February 2020.

 

44.     M.Divya, Dr.Ram Subbiah (2020), A Review on Multi Objective Optimization of Wire Cut EDM Process Parameters Using Grey Relational Analysis, International Conference on Materials Processing and Characterization, ICMPC – 2020 at GLA University, Mathura, U.P, from 21st to 23rd February 2020.

 

45.     K.Anusha, Dr. Ram Subbiah (2020) A Review on Abrasive Water Jet Machining Process and its Process Parameters, International Conference on Materials Processing and Characterization, ICMPC – 2020 at GLA University, Mathura, U.P, from 21st to 23rd February 2020.

 

46.     M.Divya, Dr.Ram Subbiah (2020), Optimisation of Machining Parameters of Wire-Cut EDM on Super Alloy Materials–A Review, International Conference on Materials Processing and Characterization, ICMPC – 2020 at GLA University, Mathura, U.P, from 21st to 23rd February 2020.

 

47.     S.Devakar Reddy, Dr. Ram Subbiah (2020), Optimization of Injection Moulding Process in Manufacturing the Flip Cover of Water Meter, International Conference on Materials Processing and Characterization, ICMPC – 2020 at GLA University, Mathura, U.P, from 21st to 23rd February 2020.

 

48.     M.Vamshi, Dr.Ram Subbiah (2020), A Review on Influence of Carburizing on Ferritic Stainless Steel, International Conference on Materials Processing and Characterization, ICMPC – 2020 at GLA University, Mathura, U.P, from 21st to 23rd February 2020.

 

49.     M.Vamshi, Dr. Ram Subbiah (2020), A Review on Influence of Nitriding on AISI430 Ferritic Stainless Steel, International Conference on Materials Processing and Characterization, ICMPC – 2020 at GLA University, Mathura, U.P, from 21st to 23rd February 2020.

 

50.     G.Lakshmi Prasanna, Dr.Ram Subbiah (2020), Effect of Nitriding on Duplex Stainless Steel – A Review, International Conference on Materials Processing and Characterization, ICMPC – 2020 at GLA University, Mathura, U.P, from 21st to 23rd February 2020.

 

51.     G.Lakshmi Prasanna, Dr. Ram Subbiah (2020), Wear Analysis of Treated Duplex Stainless Steel Material by Carburizing Process – A Review, International Conference on Materials Processing and Characterization, ICMPC – 2020 at GLA University, Mathura, U.P, from 21st to 23rd February 2020.

 

52.     A.Sravikaa, Dr.Ram Subbiah (2020), A Review on Effects of Nitriding of AISI409 Ferritic Stainless Steel, International Conference on Materials Processing and Characterization, ICMPC – 2020 at GLA University, Mathura, U.P, from 21st to 23rd February 2020.

 

    53.     A.O.S.S.Akhil, Dr.Ram Subbiah (2020), An Overview of Duplex Stainless Steel for Strain                 Induced Martensite Transformation, International Conference on Materials Processing and                     Characterization, ICMPC – 2020 at GLA University, Mathura, U.P, from 21st to 23rd February                 2020.

 

54.     P.Rohith, Dr.Ram Subbiah (2020), Nitriding Response of Chromium Alloyed AISI 439 Grade Stainless Steels Under Dry Sliding Conditions, International Conference on Advances in Material Science and Mechanical Engineering, ICAMSME – 2020 at NBKR Institute of Science & Technology, Nellore, A.P, from 7th to 9th February 2020.

 

        55.     K.Aishwarya, Dr.Ram Subbiah (2020), Friction, Wear, Micro Structural Studies of Low                     Temperature Treated AISI 409 Ferritic Stainless Steels by Ion Nitriding Process, International                 Conference on Advances in Material Science and Mechanical Engineering, ICAMSME – 2020             at NBKR Institute of Science & Technology, Nellore, A.P, from 7th to 9th February 2020. 

56.     E.Nirmala Devi, Dr.Ram Subbiah (2020), Subsurface Modifications Included by Carbo Nitriding Process on AISI 310L Stainless Steels at Low Temperature, International Conference on Advances in Material Science and Mechanical Engineering, ICAMSME – 2020 at NBKR Institute of Science & Technology, Nellore, A.P, from 7th to 9th February 2020.

 

57.     A.Rohit Sai Krishna, Dr.Ram Subbiah (2020), Structural Evolution during Mechanical Alloying of CR12 Grade Ferritic Stainless Steels by Precipitation Hardening Process, International Conference on Advances in Material Science and Mechanical Engineering, ICAMSME – 2020 at NBKR Institute of Science & Technology, Nellore, A.P, from 7th to 9th February 2020.

 

58.     B.Vamshi Krishna, Dr.Ram Subbiah (2020), Improving the Tribological Properties of AISI 2304 Duplex Stainless Steel Through Deep Cryogenic Treatment and Plasma Nitriding Process, International Conference on Advances in Material Science and Mechanical Engineering, ICAMSME – 2020 at NBKR Institute of Science & Technology, Nellore, A.P, from 7th to 9th February 2020.

 

59.     Durga Sai Sashank, Dr.Ram Subbiah (2020), Solid Solution and Grain Size Hardening of Nitrogen Alloyed AISI 2101 Duplex Stainless Steel Material, International Conference on Advances in Material Science and Mechanical Engineering, ICAMSME – 2020 at NBKR Institute of Science & Technology, Nellore, A.P, from 7th to 9th February 2020.

 

60.     M.Pramodh, Dr.Ram Subbiah (2020), Influence of Nitrocarburizing Process on AISI 630 Grade Precipitation Hardened Stainless Steels, International Conference on Advances in Material Science and Mechanical Engineering, ICAMSME – 2020 at NBKR Institute of Science & Technology, Nellore, A.P, from 7th to 9th February 2020.

 

61.     M.Manjith Srinivas, Dr.Ram Subbiah (2020), Effects of Processing & Manufacturing of High Nitrogen AISI 2507 DSS Upon their Mechanical and Wear Properties, International Conference on Advances in Material Science and Mechanical Engineering, ICAMSME – 2020 at NBKR Institute of Science & Technology, Nellore, A.P, from 7th to 9th February 2020.

 

62.     D.Harshith, Dr.Ram Subbiah (2020), Tribological Behavior & Mechanical Properties of Low Temperature Gas Carbonitrided AISI 2205 Duplex Stainless Steels in Relation to Layer Morphology, International Conference on Advances in Material Science and Mechanical Engineering, ICAMSME – 2020 at NBKR Institute of Science & Technology, Nellore, A.P, from 7th to 9th February 2020.

 

63.     K.Roshitha, Dr.Ram Subbiah (2020), Influence on Microstructure on AISI 302 Grade Austenitic stainless Steels by Pulsed Plasma Nitriding Processes, International Conference on Advances in Material Science and Mechanical Engineering, ICAMSME – 2020 at NBKR Institute of Science & Technology, Nellore, A.P, from 7th to 9th February 2020.

 

64.     A.Srujana, Dr.Ram Subbiah (2020), A Review on Improvement of Mechanical Properties on AISI 409 Ferritic stainless steels by Nitriding Process, International Conference on Advances in Material Science and Mechanical Engineering, ICAMSME – 2020 at NBKR Institute of Science & Technology, Nellore, A.P, from 7th to 9th February 2020.

 

65.     Md.Rahel, Dr.Ram Subbiah (2020), An Overview on AISI 430 Ferritic Stainless Steel by Nitriding Process, International Conference on Advances in Material Science and Mechanical Engineering, ICAMSME – 2020 at NBKR Institute of Science & Technology, Nellore, A.P, from 7th to 9th February 2020.

 

66.     Mohd Wasif Ullah Shareef, Dr.Ram Subbiah (2020), Assessment of Properties on Duplex Stainless Steel by Carburizing Process – A Review, International Conference on Advances in Material Science and Mechanical Engineering, ICAMSME – 2020 at NBKR Institute of Science & Technology, Nellore, A.P, from 7th to 9th February 2020.

 

67.     Mohammed Shehzad Qaiser, Dr.Ram Subbiah (2020), Chromium Depletion at the Vicinity of Nitrides in AISI 253 Grade Sensitized Austenitic Stainless Steels, International Conference on Advances in Material Science and Mechanical Engineering, ICAMSME – 2020 at NBKR Institute of Science & Technology, Nellore, A.P, from 7th to 9th February 2020.

 

68.     Shounak Chatterjee, Dr.Ram Subbiah (2020), Duplex Surface Treatment of AISI 904 Grade Austenitic Stainless Steels on Cryogenic Treatment for Salt Water Applications, International Conference on Advances in Material Science and Mechanical Engineering, ICAMSME – 2020 at NBKR Institute of Science & Technology, Nellore, A.P, from 7th to 9th February 2020.

 

69.     M.Mamatha Gandhi, Dr.Ram Subbiah (2020), Dry Sliding Wear Improvement on AISI 431 Grade Stainless Steel by Normalizing Process, International Web Conference on Mathematics for Materials Science, Signals, Images and Structured Data, ICMMSIS – 2020 at Bannari Amman Institute of Technology, Satyamangalam From 23rd to 24th July, 2020.

 

70.     K.Ramya Sree, Dr.Ram Subbiah (2020), Improvement of Ductility on AISI 630 Stainless Steel Material by Low Temperature Annealing Process, International Web Conference on Mathematics for Materials Science, Signals, Images and Structured Data, ICMMSIS – 2020 at Bannari Amman Institute of Technology, Satyamangalam From 23rd to 24th July, 2020.

 

71.     K.Sreekanth, Dr.Ram Subbiah (2020), Characterization of AISI301LN Grade Stainless Steel Material by Carbonitriding Process, International Web Conference on Mathematics for Materials Science, Signals, Images and Structured Data, ICMMSIS – 2020 at Bannari Amman Institute of Technology, Satyamangalam From 23rd to 24th July, 2020.

 

72.     Dr.Ram Subbiah (2020), Influence of treated AISI 321 Grade Stainless Steel Material by Cryogenic Treatment Process, International Web Conference on Mathematics for Materials Science, Signals, Images and Structured Data, ICMMSIS – 2020 at Bannari Amman Institute of Technology, Satyamangalam From 23rd to 24th July, 2020.

 

73.     G.Keerthi Reddy, Dr.Ram Subbiah (2020), Wear Characteristics of AISI 303 Grade Stainless Steel Material by Carburizing and Carbonitriding Process, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

74.     G.Keerthi Reddy, Dr.Ram Subbiah (2020), Wear Behavior Analysis and Microstructure Studies on AISI 440 Stainless Steel Heat Treated with Annealing/ Tempering Process, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

75.     M.Animesh, Dr.Ram Subbiah (2020), Investigation on Dry Sliding Wear Behavior of AISI 321 Stainless Steel Treated with Salt Bath Nitriding and Gas Nitriding Processes, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

76.     M.Animesh Dr.Ram Subbiah (2020), Improving the Mechanical Properties of AISI 2507 Stainless Steel by Cryogenic Treatment Process, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

77.     Dr.Ram Subbiah, Dr.J.Saranya, Dr.N.Sateesh (2020), Assessment of Properties on AISI 2101 Duplex Stainless Steel by Nitriding Process, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

78.     Dr.Ram Subbiah, Dr.J.Saranya, Dr.N.Sateesh (2020), Wear and Microstructure Analysis on AISI 253MA Austenitic Stainless Steel by Tempering Process, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

79.     M.Vamshi, Dr.Ram Subbiah (2020), Influence and Improvement of Properties of AISI 416 Stainless Steel by Annealing Process Under Dry Sliding Conditions, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

80.     G.Lakshmi Prasanna, Dr.Ram Subbiah (2020), Estimation of Dry sliding Wear Behavior and Microstructural Analysis of Nitrided 316LN Austenitic Stainless Steel using Gas, Saltbath and Plasma Nitriding Processes, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

81.     M.Vamshi, Dr.Ram Subbiah (2020),  Investigation of Mechanical Properties of AISI 347 Austenitic stainless Steel by Carbonitriding Process, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

82.     G.Lakshmi Prasanna, Dr.Ram Subbiah (2020), Wear Behavior Analysis of Flame Hardened and Induction Hardened AISI 302 Stainless Steel Materials, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

83.     Ch.Naveen, Dr.Ram Subbiah (2020), Aqueous Soluted Salt Bath Nitriding of 301L Austenitic Stainless Steel, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

84.     Md.Rahel, Dr.Ram Subbiah (2020), Assessment and Microstructure Analysis on AISI 630 Martensitic Stainless Steel by Hardening and Tempering Process, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

85.     K.Anusha, Dr.N.Sateesh, Dr.Ram Subbiah (2020), A Review on Present Research and Evolution in Abrasive Water Jet Machining, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

86.     K.Anusha, Dr.N.Sateesh, Dr.Ram Subbiah (2020), A Machinability Study of Ti-6Al-4V Alloy by Abrasive Water Jet Machining, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

87.     K.Vamshi kumar, N.Raghava Pavan, D.Sai Vikas Reddy, Mihir Marur, Dr.Ram Subbiah (2020), Design, Analysis and Fabrication of Folding Table for Multipurpose Applications, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

88.     P.Syamjith, G.Keerthana, K.Jayasri, M.Ruchita Valli, Dr.Ram Subbiah (2020), Design, Analysis and Fabrication of Staircase Climbing Wheel Chair for Disabled People, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

89.     Dr.Ram Subbiah (2020), Wear Characteristics of AISI 440C Grade Stainless Steel Material by Vacuum Annealing Process, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

90.     Dr.Ram Subbiah (2020), Assessment of Properties on AISI 416 Grade Stainless Steel Material by Vacuum Hardening/ Tempering Process, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

91.     Dr.Ram Subbiah (2020), Wear Behavior  Analysis of AISI 416 Stainless Steel by Cryogenic Hardening and Vacuum Tempering Process, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

92.     Dr.Ram Subbiah (2020), Kinetics of Cryogenic Treatment on Treated AISI 316LN Stainless Steel under Dry Sliding Conditions for Constant Speed and Variable Load Applications, International Web Conference on Advanced Material Science & Nanotechnology, NANOMAT – 2020 at Vinayak Vidnyan Mahavidyalaya, Amaravati, Maharashtra From 20th to 21th June, 2020.

 

93.     M.Mamatha Gandhi, Dr.Ram Subbiah (2020), Material Characterization and Dry Sliding Wear Analysis of AISI 253 Grade Stainless Steel Material by Carburizing Process, International Web Conference on Advances in Science, Engineering & Management – ICASEM 2020, at E.G.S Pillay Engineering College, Nagapattinam, on 3rd July, 2020.

 

94.     K.Ramya Sree, Dr.Ram Subbiah (2020), New Insights into the Mechanism of Low Temperature Flame Hardening Process on AISI 904L Grade Stainless Steel Material, International Web Conference on Advances in Science, Engineering & Management – ICASEM 2020, at E.G.S Pillay Engineering College, Nagapattinam, on 3rd July, 2020.

 

95.     G.Keerthi Reddy, Dr.Ram Subbiah (2020), Cryogenic Treatment Allied with Tempering Process on the Surface Layers of CR12Ti Grade Stainless Steel Material, International Web Conference on Advances in Science, Engineering & Management – ICASEM 2020, at E.G.S Pillay Engineering College, Nagapattinam, on 3rd July, 2020.

 

96.     M.Animesh, Dr.Ram Subbiah (2020), Effect of Microstructure and Wear Behavior Analysis on AISI 630 Grade Stainless Steel by Vacuum Annealing and Tempering Process under Dry Sliding Conditions, International Web Conference on Advances in Science, Engineering & Management – ICASEM 2020, at E.G.S Pillay Engineering College, Nagapattinam, on 3rd July, 2020.

 

97.     M.Vamshi, Dr.Ram Subbiah (2020), Influence and Assessment of Mechanical Properties on AISI 904L Grade Stainless Steel Material by Carburizing and Carbonitriding Process, International Web Conference on Advances in Science, Engineering & Management – ICASEM 2020, at E.G.S Pillay Engineering College, Nagapattinam, on 3rd July, 2020.

 

98.     G.Lakshmi Prasanna, Dr.Ram Subbiah (2020), Liquid Nitrided 347 Grade Stainless Steel Material under Dry Sliding Conditions and Assessment of Mechanical Properties at Low Temperatures, International Web Conference on Advances in Science, Engineering & Management – ICASEM 2020, at E.G.S Pillay Engineering College, Nagapattinam, on 3rd July, 2020.

 

99.     Md.Rahel, Dr.Ram Subbiah (2020), Dry Sliding Wear Evaluation and Surface Modifications on AISI 416 Grade Stainless Steel Material by Vacuum Annealing, Subzero Treatment Allied with Tempering & Hardening Allied with Tempering Process, International Web Conference on Advances in Science, Engineering & Management – ICASEM 2020, at E.G.S Pillay Engineering College, Nagapattinam, on 3rd July, 2020.

 

100. K.Lokesh, Dr.Ram Subbiah (2020), Surface Modifications by Vacuum Hardening/ Tempering Process on AISI 410 Grade Stainless Steel Material at Low temperatures, International Web Conference on Advances in Science, Engineering & Management – ICASEM 2020, at E.G.S Pillay Engineering College, Nagapattinam, on 3rd July, 2020.

 

101. Dr.Ram Subbiah, Dr.N Sateesh, Dr.S.K Singh, Dr.S Ravi Sekhar, Dr.B Tanya and A Anitha Lakshmi, (2020), Formation of Multiple Phase Microstructure and Assessment of Wear Properties on Treated AISI 904L Stainless Steel by Plasma Nitriding Process at Low Temperature, International Conference on Design and Manufacturing Aspects for Sustainable Energy, ICMED 2020, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad from 10th – 12th July, 2020.

 

102. M.Mamatha Gandhi, Animesh Bain, Rohith P, R Srilatha, Dr.Ram Subbiah (2020), Structure and Topography Modifications of Treated AISI 316LN Stainless Steel after Friction in Dry Sliding Contact by Case Hardening Process, International Conference on Design and Manufacturing Aspects for Sustainable Energy, ICMED 2020, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad from 10th – 12th July, 2020.

 

      103. K Ramya Sree, G Keerthi Reddy, K Aishwaryaa, E Nirmala Devi, Dr.Ram Subbiah (2020), New Insights of Wear Behavior Analysis on Low Temperature Treated AISI 253MA Stainless Steel Material by Ion Nitriding Process, International Conference on Design and Manufacturing Aspects for Sustainable Energy, ICMED 2020, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad from 10th – 12th July, 2020.

 

      104. Dr.S.Ravi Sekhar, Dr.D.Govardhan, Dr.R.Karthikeyan, Dr.Ram Subbiah (2020), Influence of Process Parameters on Physical and Mechanical Properties of Friction Surfaced Deposits on Low Carbon Steel, International Conference on Design and Manufacturing Aspects for Sustainable Energy, ICMED 2020, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad from 10th – 12th July, 2020.

 

      105. Anitha Lakshmi Akkireddy, Swathi Priya, Dr.B.Tanya, Bandhavi Challa, Dr.Ram Subbiah (2020), Investigation of Microstructure and Mechanical Properties of Austenite Stainless Steel 304 during Tempering and Cryogenic Heat Treatment, International Conference on Design and Manufacturing Aspects for Sustainable Energy, ICMED 2020, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad from 10th – 12th July, 2020.

 

      106. Dr.Sateesh Nagri, Devakar Reddy S, Dr.Ram Subbiah, Siva Nagaraju D, Nookaraju B Ch (2020), Process Parameters Optimization of Injection Moulding in DN20 Vent of Water Meter Manufacturing, International Conference on Design and Manufacturing Aspects for Sustainable Energy, ICMED 2020, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad from 10th – 12th July, 2020.

 

     107. Rohit Sai Krishna Anusuri, Vamshi Krishna Bandarupally, Harshith Devarasetty, Sashank Tamilarasan Dr.Ram Subbiah (2020) Investigation Of Mechanical Properties Of AISI 316 Stainless Steel By Carbonitriding process, International Conference on Design and Manufacturing Aspects for Sustainable Energy, ICMED 2020, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad from 10th – 12th July, 2020.

 

       108. Shivani Koppula, Aakula Rajkumar, Siram Hari Krishna, Reddi Sai Prudhvi, Siripuram Aparna Dr.Ram Subbiah (2020) Improving The Mechanical Properties Of AISI 2205 Duplex Stainless Steel By Cryogenic Treatment Process, , International Conference on Design and Manufacturing Aspects for Sustainable Energy, ICMED 2020, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad from 10th – 12th July, 2020.

 

        109. Lakshmi Deepak Tadepalli, Ananda Mithra Gosala, Lokesh Kondamuru, Sai Chandra Bairi, A. Anitha Lakshmi, Dr.Ram Subbiah (2020), Assessment Of Properties On AISI430 Ferritic Stainless Steel By Nitriding Process, International Conference on Design and Manufacturing Aspects for Sustainable Energy, ICMED 2020, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad from 10th – 12th July, 2020.

 

      110. Gandla Lakshmi Prasanna, G Keerthi Reddy, Dr. Ram Subbiah (2020), Evaluation of properties of AISI 431Grade Stainless Steel by Vacuum Annealing Process, International Conference on Design and Manufacturing Aspects for Sustainable Energy, ICMED 2020, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad from 10th – 12th July, 2020.

 

     111. Gandla Lakshmi Prasanna, Dr.J Saranya, Dr. Ram Subbiah (2020), Assessment of AISI 431Grade Stainless Steel properties by Vacuum Tempering Process, International Conference on Design and Manufacturing Aspects for Sustainable Energy, ICMED 2020, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad from 10th – 12th July, 2020.

 

       112. Manne Vamshi, Dr.J Saranya, Dr.Ram Subbiah (2020), Improvement Of Characteristics Of AISI 310 Grade Stainless Steel Material By Carburizing process, International Conference on Design and Manufacturing Aspects for Sustainable Energy, ICMED 2020, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad from 10th – 12th July, 2020.

 

      113. Manne Vamshi, Animesh Bain, M Sreekanth, Dr.Ram Subbiah (2020), Wear Characteristics Of AISI 310 Grade Stainless Steel Material By Carbonitriding Process, International Conference on Design and Manufacturing Aspects for Sustainable Energy, ICMED 2020, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad from 10th – 12th July, 2020.

 

     114. Anitha Lakshmi Akkireddy, Dr.B.Tanya, Dr.Ram Subbiah, Bandhavi Challa (2020), Formability Studies of Automotive Aluminium Alloy Sheet series: A Review, International Conference on Design and Manufacturing Aspects for Sustainable Energy, ICMED 2020, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad from 10th – 12th July, 2020.

 

    115. Pradeep Kumar Manne, Nutenki Shravan Kumar, Dr.B.Tanya, A Anitha Lakshmi, Dr.Ram Subbiah (2020), Powder Metallurgy Techniques for Titanium Alloys-A Review, International Conference on Design and Manufacturing Aspects for Sustainable Energy, ICMED 2020, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad from 10th – 12th July, 2020.

 

        116. K.Lokesh, Dr.Ram Subbiah (2020), Finite Element Prediction of Friction Stir Weld Fatigue Life, International Conference on Innovations in Thermo Fluid Engineering & Sciences, ICITFES – 2020 at NIT, Rourkela, from 10th to 12th February 2020.

 

        117. Ambatti Arun Kumar, Dr.Ram Subbiah (2020), Microstructure & Mechanical Properties of Friction Stir Welded Al 7075/ SiC Metal Matrix Composites, International Conference on Innovations in Thermo Fluid Engineering & Sciences, ICITFES – 2020 at NIT, Rourkela, from 10th to 12th February 2020.

                                                                                           

118. B.Chaitanya Kumar, P.Sri Charan, Kanishkar Jayakumar, D.Alankrutha, G.Sindhu, Dr.Ram Subbiah (2020), Assessment of Wear Properties on Low Temperature Molten Salt Bath Nitriding on Austenitic Stainless Steel, International Conference on Advanced Light Weight Materials and Structures (ICALMS 2k20) at CMR Technical Campus, Hyderabad from 6th to 7th March, 2020. 

                        

119. A.Rohit Sai Krishna, B.Vamshi Krishna, T.Sashank, D.Harshith, Dr.Ram Subbiah (2020), Influence and Assessment of Mechanical Properties on Treated P91 Steel with Normalizing Processes, International Conference on Advanced Light Weight Materials and Structures (ICALMS 2k20) at CMR Technical Campus, Hyderabad from 6th to 7th March, 2020.

 

120. K.Manjith Srinivas, S.Bharath, P.N.V.Krishna Chaitanya, M.Pramod, Dr.Ram Subbiah (2020), Improving Tribological Properties of P91 Steels through Carburizing Process, International Conference on Advanced Light Weight Materials and Structures (ICALMS 2k20) at CMR Technical Campus, Hyderabad from 6th to 7th March, 2020.

 

121. Lakshmi Deepak T, Ananda Mithra G, Lokesh K, Sai Chandra B, Dr. Ram Subbiah (2020),Stability of Expanded Austenite by Gas Nitriding Process on Austenitic Stainless Steel Material under Low Temperature Conditions, International Conference on Advanced Light Weight Materials and Structures (ICALMS 2k20) at CMR Technical Campus, Hyderabad from 6th to 7th March, 2020.

 

        122. Shivani Koppula, Pallavi Gugulothu, Dr.N.Sateesh, Dr. Ram Subbiah (2020), A Review on AISI 2205 Stainless Steel Treated with Plasma Nitriding Process, International Conference on Advanced Light Weight Materials and Structures (ICALMS 2k20) at CMR Technical Campus, Hyderabad from 6th to 7th March, 2020. 

    123. Sheri Vaijayanth, Shivani Koppula, Dr.N.Sateesh, Dr. Ram Subbiah (2020), Effect of RF Carbonitriding and Improvement of Mechanical Properties on AISI 304 Stainless Steel – A Review, International Conference on Advanced Light Weight Materials and Structures (ICALMS 2k20) at CMR Technical Campus, Hyderabad from 6th to 7th March, 2020.

    124. Sheri Vaijayanth, Shivani Koppula, Dr.N.Sateesh, Dr. Ram Subbiah (2020), An Overview on AISI 304 Stainless Steel Treated With Aqueous Soluted Nitriding Process, International Conference on Advanced Light Weight Materials and Structures (ICALMS 2k20) at CMR Technical Campus, Hyderabad from 6th to 7th March, 2020.

125. M.Prabhakaran, C.Sivakandhan, Chevvuri Venkata Sai Ram Gopal, Sai Nikhilesh Pilla, Dr. Ram Subbiah, S.Marichamy (2019), Machinability Investigations on Cupronickel MMC through Unconventional Machining Processes, International Conference on Advances in Materials Research – 2019, Bannari Amman Institute of Technology, Sathiyamangalam, Erode on 6th to 7th December, 2019.

126. K. Rajasuthan, M.Palpandi, Veernapati Gitanjali, Panati Nithya, Dr.Ram Subbiah, S.Marichamy (2019), Evaluation of Material Removal Rate of Stellite Alloy Using Unconventional Machining Processes, International Conference on Advances in Materials Research – 2019, Bannari Amman Institute of Technology, Sathiyamangalam, Erode on 6th to 7th December, 2019.

127. J.Anix Joel Singh, T.Vishnu Vardhan, J. Vairamuthu, B. Stalin, Dr.Ram Subbiah (2019) , Analyses of Particle Size and Abrasive Water Jet Drilling of Synthesized Chromel Metal Matrix, International Conference on Advances in Materials Research – 2019, Bannari Amman Institute of Technology, Sathiyamangalam, Erode on 6th to 7th December, 2019.

128. Santhanakrishnan Raman, J. Vairamuthu, B. Stalin, Dr.Ram Subbiah, S. Maniraj (2019), Hardness Performance Analysis of Chromel Composite Using End and Lateral Quenching Method, International Conference on Advances in Materials Research – 2019, Bannari Amman Institute of Technology, Sathiyamangalam, Erode on 6th to 7th December, 2019.

129. M. Balasubramanian, B. Stalin, S. Marichamy, K. Anandan, Dr.Ram Subbiah (2019), Assessment of Weld Joint Strengths on Dissimilar Alloys of Inconel 625 and Aluminium 7068 Using FSW Process, International Conference on Advances in Materials Research – 2019, Bannari Amman Institute of Technology, Sathiyamangalam, Erode on 6th to 7th December, 2019.

130. Girisha L, S.Karthik, B.Kalins, K.Bala Koteswarao, Dr.Ram Subbiah, S.Marichamy (2019), Parametric Optimization and Spark Erosion Behaviours of Synthesized Niobium Composite, International Conference on Advances in Materials Research – 2019, Bannari Amman Institute of Technology, Sathiyamangalam, Erode on 6th to 7th December, 2019.

131. M.Makesh, G.Sivaraman, N.Saravanan, S.Prashanth, Dr.Ram Subbiah, K.Anand (2019), Experimental Investigation of Control Parameters for Machining of Copper Alloys using Electrochemical Micromachining, International Conference on Advances in Materials Research – 2019, Bannari Amman Institute of Technology, Sathiyamangalam, Erode on 6th to 7th December, 2019.

132. K. Muralidharan, S. Shalini Packiam Kamala, D. Alankrutha, K.Bhanu prakash, Dr.Ram Subbiah, S.Marichamy (2019), Parametric Analysis and Performance of Laser Cutting on Strenx Steel, International Conference on Advances in Materials Research – 2019, Bannari Amman Institute of Technology, Sathiyamangalam, Erode on 6th to 7th December, 2019.

133. T.Blesslin Sheeba, A.Albert Raj, D.Ravikumar, S.Sheeba Rani, P.Vijayakumar, Dr.Ram Subbiah, (2019) Analysis of Silica based Prosthetic Human Teeth using 3D Printing Machine for Dental Assistance, International Conference on Advances in Materials Research – 2019, Bannari Amman Institute of Technology, Sathiyamangalam, Erode on 6th to 7th December, 2019.

134. J. Granty Regina Elwin, S. Joshua Kumaresan, C.Ram Kumar, Ajith.B.Singh, S.Marichamy, Dr.Ram Subbiah (2019), Optimization of System and Piezoelectric Effect on PZT Crystal, International Conference on Advances in Materials Research – 2019, Bannari Amman Institute of Technology, Sathiyamangalam, Erode on 6th to 7th December, 2019.

135. Shiva naga sathwik sridhara, Sree chandra siddhardha Allada, Sharmi Sai PV, Spandana.Banala, Dr.Ram Subbiah, S.Marichamy (2019), Tensile Strength Performance and Optimization of Al 7068 using TIG Welding Process, International Conference on Advances in Materials Research – 2019, Bannari Amman Institute of Technology, Sathiyamangalam, Erode on 6th to 7th December, 2019.

136. A.Jayapradha, G. Jims John Wessley, G. Vimalarani, P. Ramesh Kumar, Dr.Ram Subbiah, S. Maniraj (2019), Mathematical modeling and Investigation on Aluminium Bronze MMC using ECM Process, International Conference on Advances in Materials Research – 2019, Bannari Amman Institute of Technology, Sathiyamangalam, Erode on 6th to 7th December, 2019.

137. Girisha.L, S. Sridhar, Lakshmi Deepak Tadepalli , M.Swetha, Dr.Ram Subbiah, S.Marichamy (2019),   Performance analysis and Taguchi approach on Wire Cut EDM using Microwave Sintered Chromium Composite, International Conference on Advances in Materials Research – 2019, Bannari Amman Institute of Technology, Sathiyamangalam, Erode on 6th to 7th December, 2019.

138. B.Kalins, Vicharapu Naveen, Girisha L, Uppala Nutan Kumar, Dr.Ram Subbiah , S.Marichamy (2019),  Numerical Investigation on Laser Welding of Titanium Plates, International Conference on Advances in Materials Research – 2019, Bannari Amman Institute of Technology, Sathiyamangalam, Erode on 6th to 7th December, 2019.

139. Kevin Charles Alamanda , Sivaraman Nilapparai, Vicharapu Naveen, Yedla Shyam Prasad, Dr.Ram Subbiah, S.Marichamy (2019), Optimization and Improvement of Heat Transfer through Aluminium Oxide based Nano Fluid, International Conference on Advances in Materials Research – 2019, Bannari Amman Institute of Technology, Sathiyamangalam, Erode on 6th to 7th December, 2019. 

140. Dr. Ram.Subbiah (2019), Optimization of Injection Moulding Process in Manufacturing the Top Cap of Water Meter, International Conference on Materials Processing and Characterization, ICMPC – 2019 at Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, from 8th to 10th March 2019.

141. Dr. Ram.Subbiah (2019), Investigation on Microstructure and Mechanical Properties of Treated AISI 440 steel by Tempering Process, International Conference on Materials Processing and Characterization, ICMPC – 2019 at Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, from 8th to 10th March 2019. 

142. Dr. Ram.Subbiah (2019), Experimental Study of Wear Behavior on Al-2014 Alloy Coated with Thermal Spray High Velocity Oxy Fuel and Plasma Spray Process, International Conference on Materials Processing and Characterization, ICMPC – 2019 at Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad , from 8th to 10th March 2019.

 

143. Dr. Ram.Subbiah (2019), Investigation on Microstructure and Mechanical Properties of P91 Alloy Steel Treated with Normalizing Process, International Conference on Materials Processing and Characterization, ICMPC – 2019 at Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, from 8th to 10th March 2019.

 

144. Dr. Ram.Subbiah. (2019), Experimental Study on Wear Resistance of AISI 347 Stainless Steel Treated with Salt Bath and Gas Nitriding Processes, International Conference on Materials Processing and Characterization, ICMPC – 2019 at Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad , from 8th to 10th March 2019.

 

145. C.Pavan, Dr.N.Sateesh, Dr.Ram.Subbiah (2019), Taguchi Analysis on Machinability of Inconel 600 using Copper, Brass and Copper Tungsten Electrodes, 2nd International Mechanical Engineering Congress (IMEC – 2019) at National Institute of Technology, Tiruchirappalli (NITT), from 29th November- 1st December 2019.

146. U.Harish Kumar, D.Eswaraiah, Dr.Ram.Subbiah (2019), Process Optimization Of Oxy Blown Fluidized Bed Gastification Of High Ash Indian Coals Through Energy Analysis, 2nd International Mechanical Engineering Congress (IMEC – 2019) at National Institute of Technology, Tiruchirappalli (NITT), from 29th November- 1st December 2019. 

147. P.Chenneshwari, Dr.N.Sateesh, Dr.Ram.Subbiah (2019), Optimization Of Machining Process Parameters In Al 7175 Metal Matrix Composites Using Taguchi Method, 2nd International  Mechanical Engineering Congress (IMEC – 2019) at National Institute of Technology, Tiruchirappalli (NITT), from 29th November- 1st December 2019.

148. B.Ch Nookaraju, Kezia Rani P, P S V Kurmarao, Naga Sarada S, N Sateesh, A Anitha Lakshmi, Dr.Ram Subbiah (2019), Experimental and Transient Thermal Analysis of Screen MeshWick Heat Pipe, 2nd International  Mechanical Engineering Congress (IMEC) 2019 at National Institute of Technology, Tiruchirappalli (NITT), from 29th November- 1st December 2019.

149. Dr.Ram.Subbiah (2019), Tribological Characteristics on F18MS Ferritic Stainless Steel Material by Carburizing and Carbonitriding Process, International Conference on Emerging Trends in Engineering, Technology, Management and Sciences, ICEETM 2019 at Ashoka Institute of Engineering & Technology, Hyderabad from 23rd -24th September 2019. 

 

150. Dr.Ram.Subbiah (2019), Investigation of Dry Sliding Wear Behavior Analysis on AISI 430 Ferritic Stainless Steel Material by Carbo Nitriding Process, International Conference on Emerging Trends in Engineering, Technology, Management and Sciences, ICEETM 2019 at Ashoka Institute of Engineering & Technology, Hyderabad from 23rd -24th September 2019.

 

151. Dr.Ram.Subbiah (2019), Wear Behavior Analysis on AISI 409 Ferritic Stainless Steel Material by Cryogenic Hardening & Plasma Hardening Process, International Conference on Emerging Trends in Engineering, Technology, Management and Sciences, ICEETM 2019 at Ashoka Institute of Engineering & Technology, Hyderabad from 23rd -24th September 2019.

 

152. Dr.Ram.Subbiah (2019), Assessment of Mechanical Properties on CR12 Ferritic Stainless Steel Material by Gas & Salt Bath Nitriding Process, International Conference on Emerging Trends in Engineering, Technology, Management and Sciences, ICEETM 2019 at Ashoka Institute of Engineering & Technology, Hyderabad from 23rd -24th September 2019.

 

153. Dr.Ram.Subbiah (2019), Investigation of Wear Analysis and Testing Mechanical Properties On P91 Alloy Steel Treated With Case Hardening Process, International Conference on Emerging Trends in Engineering, Technology, Management and Sciences, ICEETM 2019 at Ashoka Institute of Engineering & Technology, Hyderabad from 23rd -24th September 2019.

 

154. Dr.Ram.Subbiah (2019), Dry Sliding Wear Behavior Analysis and Testing Of Mechanical Properties on AISI 440 Martensitic Stainless Steel By Annealing and Tempering Process, International Conference on Emerging Trends in Engineering, Technology, Management and Sciences, ICEETM 2019 at Ashoka Institute of Engineering & Technology, Hyderabad from 23rd -24th September 2019.

 

155. Dr.Ram.Subbiah (2019), Diffusion Coating on Al 2014 Alloy Under Dry Sliding Conditions And Analysis of Its Wear Characteristics, International Conference on Emerging Trends in Engineering, Technology, Management and Sciences, ICEETM 2019 at Ashoka Institute of Engineering & Technology, Hyderabad from 23rd -24th September 2019.

 

156. Dr.Ram.Subbiah (2019), Aqueous Salt Bath Nitriding on AISI 310 Stainless Steel Material And Assessment of Wear Behavior at Dry Sliding Conditions, International Conference on Emerging Trends in Engineering, Technology, Management and Sciences, ICEETM 2019 at Ashoka Institute of Engineering & Technology, Hyderabad from 23rd -24th September 2019.

 

157. Naga Sai Harika, M.Balubai, Dr.Ram.Subbiah (2019), Comparison of Hardness Enhancement & Wear Mechanisms in Low Temperature Carbonitrided Ferritic/ Martensitic Stainless Steels, International Conference on Emerging Trends in Engineering, Technology, Management and Sciences, ICEETM 2019 at Ashoka Institute of Engineering & Technology, Hyderabad from 23rd -24th September 2019.

 

158. R.Ambika, M.Balubai, Dr.Ram.Subbiah (2019), New Insights into the Mechanism of Low Temperature Active Screen Plasma Nitriding of Ferritic Stainless Steels, International Conference on Emerging Trends in Engineering, Technology, Management and Sciences, ICEETM 2019 at Ashoka Institute of Engineering & Technology, Hyderabad from 23rd -24th September 2019.

 

159. A.Srujana, M.Balubai, Dr.Ram.Subbiah (2019), Surface & Topography Modifications of Stainless Steel Surfaces after Friction in Dry Sliding Contact, International Conference on Emerging Trends in Engineering, Technology, Management and Sciences, ICEETM 2019 at Ashoka Institute of Engineering & Technology, Hyderabad from 23rd -24th September 2019.

 

160. Ch.Naveen, Ch.Bandhavi, Dr.Ram.Subbiah (2019), Cathode Cage Gas Nitriding of AISI 316LN Austenitic Stainless Steel with Variable Ratios of N2/ H2 on the Surface, International Conference on Emerging Trends in Engineering, Technology, Management and Sciences, ICEETM 2019 at Ashoka Institute of Engineering & Technology, Hyderabad from 23rd -24th September 2019.

 

161. Ch.Naveen, Ch.Bandhavi, Dr.Ram.Subbiah (2019), Dry Sliding Wear Behavior Analysis on AISI 253MA Stainless Steel by Flame Hardening Process, International Conference on Emerging Trends in Engineering, Technology, Management and Sciences, ICEETM 2019 at Ashoka Institute of Engineering & Technology, Hyderabad from 23rd -24th September 2019.

 

162. M.Monika, Dr.Ram Subbiah (2019), Kinematic Analysis & Fabrication of Ornithopter Flapping Wing Mechanism, International Conference on Innovative Trends in Engineering Science & Management, ICITESM 2019 at Narasimha Reddy Engineering College, Hyderabad on 21sr December 2019.

 

163. G.Keerthi Reddy, Dr.Ram Subbiah (2019), Design & Analysis of Hybrid Solar & Wind Turbine Tree, International Conference on Innovative Trends in Engineering Science & Management, ICITESM 2019 at Narasimha Reddy Engineering College, Hyderabad on 21sr December 2019.

 

164. G.Sainath, Dr.Ram Subbiah (2019), Fabrication & Mechanical Characterization of Glass and Carbon Fiber Reinforced Composites, International Conference on Innovative Trends in Engineering Science & Management, ICITESM 2019 at Narasimha Reddy Engineering College, Hyderabad on 21sr

December 2019.

 

165. P.Prashanth Kumar, Dr.Ram Subbiah (2019), Case Study on Manufacturing of a Critical Component – Outer Gimbal on Willemin Macodel 508 Mill Turn Machine, International Conference on Innovative Trends in Engineering Science & Management, ICITESM 2019 at Narasimha Reddy Engineering College, Hyderabad on 21sr December 2019.

 

166. M.Pradeep Kumar, Dr.Ram Subbiah (2019), Determination of Surface Characteristics on Micro EDM Drilling Process Over Titanium Material, International Conference on Innovative Trends in Engineering Science & Management, ICITESM 2019 at Narasimha Reddy Engineering College, Hyderabad on 21sr December 2019.

 

167. N.Shravan Kumar, Dr.Ram Subbiah (2019), Experimental Investigation & Optimization of Process Parameters in FDM Printed Carbon Fibre Reinforced PLA,International Conference on Innovative Trends in Engineering Science & Management, ICITESM 2019 at Narasimha Reddy Engineering College, Hyderabad on 21sr December 2019.

 

168. B.Bhanu Prakash, Dr.Ram Subbiah (2019), Experimental Investigation & Optimization of Process Parameters in FDM Printed ABS Samples for UAV Application, International Conference on Innovative Trends in Engineering Science & Management, ICITESM 2019 at Narasimha Reddy Engineering College, Hyderabad on 21sr December 2019.

 

169. A.Vamsee Krishna, Dr.Ram Subbiah (2019), Modelling of 3D Printing of a Helical Gear, International Conference on Innovative Trends in Engineering Science & Management, ICITESM 2019 at Narasimha Reddy Engineering College, Hyderabad on 21sr December 2019.

 

170. S.Suresh, Dr.Ram Subbiah (2019), Prediction of Machine Parameters Incase of Nano Fluid Based MQL System, International Conference on Innovative Trends in Engineering Science & Management, ICITESM 2019 at Narasimha Reddy Engineering College, Hyderabad on 21sr December 2019.

 

171. Animesh Bain, Dr.Ram Subbiah (2019), Design and Analysis of Composite Pressure Vessels, International Conference on Innovative Trends in Engineering Science & Management, ICITESM 2019 at Narasimha Reddy Engineering College, Hyderabad on 21sr December 2019.

 

172. R.Sukesh Reddy, Dr.Ram Subbiah (2019), Modelling and Analysis of CAM Shaft, International Conference on Innovative Trends in Engineering Science & Management, ICITESM 2019 at Narasimha Reddy Engineering College, Hyderabad on 21sr December 2019.

 

173. P.Muralidhar, Dr.Ram Subbiah (2019), Mechanical Properties and Microstructural Analysis of SS304/ 310 through Dissimilar Joining by TIG & SMAW, International Conference on Innovative Trends in Engineering Science & Management, ICITESM 2019 at Narasimha Reddy Engineering College, Hyderabad on 21sr December 2019.

 

174. G.Keerthi Reddy, Dr.Ram Subbiah (2019), Fabrication of Hybrid Solar & Wind Turbine Tree, International Conference on Innovative Trends in Engineering Science & Management, ICITESM 2019 at Narasimha Reddy Engineering College, Hyderabad on 21sr December 2019.

 

175. Y.V.K.Anil Kumar, Dr.Ram Subbiah (2019), Intelligent Wallet Parking Robot, International Conference on Innovative Trends in Engineering Science & Management, ICITESM 2019 at Narasimha Reddy Engineering College, Hyderabad on 21sr December 2019.

 

176. Dr.Ram.Subbiah (2018), Microstructural characterization of Low Temperature Solution Nitrided AISI347 Grade Stainless Steel Material, 9th International Conference on Latest Trends in New Era of Engineering, Science, Arts, Management, Agriculture, Law, Pharmacy and Medical Science at Babu khan Estate, IIAR Continental Conference hall, Basheerbagh, Hyderabad, 25th to 26th March 2018.

 

177. Dr.Ram.Subbiah (2018), Effect of Cryogenic Treatment Allied with Tempering Process on the Surface Layers of AISI431 Grade Stainless Steel Material, International Conference on Trends in Engineering, Management, Pharmacy & Sciences, Geethanjali college of Engineering and Technology, Hyderabad 21st April 2018.

 

178. Dr.Ram.Subbiah (2018), New Insights into the Mechanism of Low Temperature Carburizing Process on AISI 316 Grade Stainless Steel Material, International Conference on Trends in Engineering, Management, Pharmacy & Sciences, Geethanjali college of Engineering and Technology, Hyderabad 21st April 2018.

 

179. Dr.Ram.Subbiah (2018), Assessment of Properties by Combined Carburizing and Nitriding Process on AISI316 Grade Stainless Steel Material for Improved Wear Resistance, International Conference on Trends in Engineering, Management, Pharmacy & Sciences, Geethanjali college of Engineering and Technology, Hyderabad 21st April 2018.

 

180. Dr. Ram.Subbiah (2018),Wear Behavior Analysis and Microstructure of AISI 440 Steel by Tempering Process, International conference on Advances in Mechanical Engineering at CMR College of Engineering and Technology, Hyderabad, 21st to 22nd December 2018.

 

181. Dr. Ram.Subbiah (2018), Modification of AISI 347 Stainless steel by Low Temperature Salt Bath Nitriding Process, International conference on Advances in Mechanical Engineering at CMR College of Engineering and Technology, Hyderabad, 21st to 22nd December 2018.

 

182. Dr. Ram.Subbiah (2018), Investigation of Wear Properties on AISI D2 Tool steel by various Heat Treatment Process, International conference on Advances in Mechanical Engineering at CMR College of Engineering and Technology, Hyderabad, 21st to 22nd December 2018.

 

183. Dr. Ram.Subbiah (2018),Comparative Study of Wear Behavior on Al 2014 Alloy Coated with Thermal Spray and Plasma Spray Methods, International conference on Advances in Mechanical Engineering at CMR College of Engineering and Technology, Hyderabad, 21st to 22nd December  2018.

 

184. Dr. Ram.Subbiah (2018),Investigation on Hardness and Microstructure on EN3 steel by Hardening and Tempering Process, International conference on Emerging Trends in Engineering, Sciences and Management at RGM College of Engineering and Technology, Nandyal, 21st to 22nd December 2018.

 

185. Dr. Ram.Subbiah (2018),Experimental Investigation on Cold Work Tool Steels Grade D2 by Air Hardening, International conference on Emerging Trends in Engineering, Sciences and Management at RGM College of Engineering and Technology, Nandyal, 21st to 22nd December 2018.

 

186. M.Harini, Dr. Ram.Subbiah (2018), Comparative Study of Wear Behavior on Al 2014 Alloys with Various Coating Techniques, International conference on Emerging Trends in Engineering, Sciences and Management at RGM College of Engineering and Technology, Nandyal, 21st to 22nd December 2018.

 

187. G.Pooja, Dr. Ram.Subbiah (2018), Investigation on Hardness and Microstructure on EN 353 Material by Gas Carburizing, International conference on Emerging Trends in Engineering, Sciences and Management at RGM College of Engineering and Technology, Nandyal, 21st to 22nd December 2018.

 

188. Dr. Ram.Subbiah, Dr. S.Surendarnath. (2016),Wear behavior on 316LN Austenitic Stainless Steel Material by Liquid Nitriding Process, International Conference on Materials Processing and Characterization, ICMPC – 2016 at Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, from 12th to 13th March 2016.

 

189. Dr.S.Surendarnath, Dr. Ram.Subbiah. (2016),Finite Element Simulation of Pure Aluminium Processed by ECAP Using New Die Design, International Conference on Materials Processing and Characterization, ICMPC – 2016 at Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, from 12th to 13th March 2016.

 

190. Dr. Ram.Subbiah (2016), Influence of Alumina Particles on Mechanical Properties & Fracture Study of Al/ Al2O3 Metal Matrix Composite, ICMPC – 2016 at Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, from 12th to 13th March 2016.

 

191. Dr.R.Ganesh, Dr.Ram.Subbiah. (2015), Dry sliding wear behavior of powder metallurgy aluminium matrix composite, International Conference on Materials Processing and Characterization, ICMPC – 2015 at Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad , from 14th to 15th March 2015.

 

192. Ram.Subbiah, Dr.R.Rajavel. (2012), Influence of Salt Bath Nitriding Process on Stainless Steel Material, International Conference on Advances in Mechanical, Manufacturing and Building Sciences, ICAMB – 2012 at VIT University, Vellore from 09th to 11th January 2012.

 

193. Ram.Subbiah, Dr.R.Rajavel. (2012), Low Temperature Gas Nitriding Process on 316LN Austenitic Stainless Steel Material, International Conference on Advances in Mechanical, Manufacturing and Building Sciences, ICAMB – 2012 at VIT University, Vellore from 09th to 11th January 2012.

 

194. Ram.Subbiah, Dr.R.Rajavel. (2012), Sliding wear evaluation of plasma nitrided 316LN stainless steel material, International Conference on Advances in Mechanical, Manufacturing and Building Sciences, ICAMB – 2012 at VIT University, Vellore from 09th to 11th January 2012.

 

195. Ram.Subbiah, Dr.R.Rajavel. (2012), Salt Bath Nitriding of 316LN Stainless Steels, International Conference on Systems, Methodologies, Automation and Research Trends, SMART – 2012 at Sri Manakula Vinayagar Engineering College, Pondicherry on 12th-14th December 2012.

 

196. Ram.Subbiah, Dr.R.Rajavel. (2012), Wear Behavior of 316LN Austenitic Stainless Steels by Gas Nitriding Processes, International Conference on Systems, Methodologies, Automation and Research Trends, SMART – 2012 at Sri Manakula Vinayagar Engineering College, Pondicherry on 12th-14th December 2012.

 

197. Ram.Subbiah, Dr.R.Rajavel. (2012), Assessment of Properties of Austenitic Stainless Steel by Plasma Nitriding Processes, International Conference on Systems, Methodologies, Automation and Research Trends, SMART – 2012 at Sri Manakula Vinayagar Engineering College, Pondicherry on 12th-14th December 2012.

 

198. Ram. Subbiah, Dr.R.Rajavel. (2011), Low Temperature Salt Bath Nitriding of 316LN  Stainless Steel Material, International Conference in South Asia on Global Manufacturing Systems and Management, ICGMSM – 2011 at Coimbatore Institute of Technology, Coimbatore from 1st to 3rd August 2011.

 

199. Ram.Subbiah, Dr.R.Rajavel. (2011), Surface Modifications of Austenitic Stainless Steels by Plasma Nitriding Process and Analyzing its Wear Behavior, International Conference in South Asia on Global Manufacturing Systems and Management, ICGMSM – 2011 at Coimbatore Institute of Technology, Coimbatore from 1st to 3rd August 2011.

 

200. Ram.Subbiah, Dr.R.Rajavel. (2011), Studies on Dry Sliding Wear Behavior of 316LN Austenitic Stainless Steel by Salt Bath Nitriding Process, International Conference on Recent Advances in Mechanical Engineering, INCRAME – 2011 at MGR University, Chennai from 21st to 22rd April 2011.

 

201. Ram.Subbiah, Dr.R.Rajavel. (2011), Assessment of Properties of Austenitic Stainless Steel by Plasma Nitriding Process, International Conference on Recent Advances in Mechanical Engineering, INCRAME – 2011 at MGR University, Chennai from 21st to 22rd April 2011.

 

202. Ram.Subbiah, Dr.R.Rajavel. (2011), Gas Nitriding of 316LN Austenitic Stainless Steel and Analyzing its Wear Behavior, International Conference on Recent Advances in Mechanical Engineering, INCRAME – 2011 at MGR University, Chennai from 21st to 22rd April 2011.

 

203. Ram.Subbiah (2008), Implementation of Low Cost Automation in Textile Industry, International Conference on Digital Factory – ICDF 2008, Coimbatore Institute of Technology, Coimbatore, on 11th to 13th August 2008.

 

204. Ram.Subbiah (2008), Industrial & Medical Applications of Robots, International Conference on Digital Factory – ICDF 2008, Coimbatore Institute of Technology, Coimbatore, on 11th to 13th August 2008.

 

205. Ram.Subbiah (2008), Microcontroller Based Car Parking System, International Conference on Digital Factory – ICDF 2008, Coimbatore Institute of Technology, Coimbatore, on 11th to 13th August 2008.

 



Comments